List of cvars

Cvar	Default value	Description	Flags	Notes
aa_adhesion_contributionpercentmax	0.0	Max Adhesion Contribution Percentage (Value must be in 0..1 range)	0x14
aa_adhesion_innterradiusrolloffpercent	0.6	The percentage of the calculated radius to use as the inner radius for rolloff calculation	0x14
aa_adhesion_optimalradius	30	Optimal Distance for adhesion to take an effect	0x14
aa_adhesion_pitchspeedmax	15	Max Pitch Adhesion Speed	0x14
aa_adhesion_radius	15	Radius used to apply adhesion amount	0x14
aa_adhesion_yawspeedmax	25	Max Yaw Adhesion Speed	0x14
aa_allowinterpolate	1	Interpolate the aim assist friction	0x11
aa_debugselector	0	Visualize aim assist selector (debugging)	0x1
aa_distance_expandradiusdistmax	1.0	Max fractional distance before expanding kicks in (smoothstep formula)	0x14
aa_distance_expandradiusdistmin	0.3	Min fractional distance before expanding kicks in (smoothstep formula)	0x14
aa_distance_expandradiusmultiplier	1.0	The expanded multiplier for target radius, friction radius and adhesive radius	0x14
aa_distance_max	128	Maximum Optimal Distance for aim assist effect	0x14
aa_distance_min	0	Minimum Optimal Distance for aim assist effect	0x14
aa_distance_rampdown	10	Distance for ramping down distance modifier	0x14
aa_distance_rampup	1024	Distance for ramping up distance modifier	0x14
aa_enable	1	Enables aim assist	0x811
aa_friction_innterradiusrolloffpct	0.1	The percentage of the calculated radius to use as the inner radius for rolloff calculation	0x14
aa_friction_multipliermax	0.25	Maximum Friction Scalar - Value must be in 0..1 and smaller than corresponding max value	0x14
aa_friction_multipliermin	0.0	Minimum Friction Scalar - Value must be in 0..1 and smaller than corresponding max value	0x14
aa_friction_optimalradius	75	Optimal Distance for Friction to take an effect	0x14
aa_friction_radius	25	Friction Collision Sphere Radius	0x14
aa_interpolaterate	0.6	The rate in which aim assist interpolates the friction	0x14
aa_selection_maxdegrees	10	The Maximum angular separation from the aim axis	0x14
aa_selection_maxdistance	950	The Maximum Distance away for a target to be considered for adhesion, friction and target lock-to	0x14
bnet_acctType	0	BNet account type (internal use only)	0x12
bnet_anonbuid		BNet anonymous account ID (internal use only)	0x18
bnet_doQuickAccountProcess	1	Internal use only	0x11
bnet_lastbuid		BNet client BUID (internal use only)	0x18
bnet_platformId		BNet platform ID (internal use only)	0x18
bnet_scEntitlementPlatfId		Slayers Club platform ID (internal use only)	0x18
bnet_scEntitlementUnlocked	0	Slayers Club successfully unlocked - Internal use only	0x11
bnet_silentLog	0	Silence BNET debug log messages in console for user convenience	0x11
bnet_uuid		BNet client UUID (internal use only)	0x18
bot_aim_debug	0	1 = Enable Debugging Of Bot Aiming	0x81
bot_aim_disabled	0	1 = Disable Bot Aiming	0x81
bot_aim_instant	0	1 = Bots Are Aimbots - For Testing	0x81
bot_attackHumansOnly	0	1 = Bots ONLY Attack Human Players	0x81	Added in 'Sep 24 2021' update.
bot_axeAttack	0	1 = Bots ONLY Use Melee Weapons In Combat	0x81
bot_chat_disable	0	1 = Bots Aren't Allowed To Chat	0x1
bot_combatDisabled	0	1 = Bots Don't Go Into Combat Behaviors	0x81
bot_debugSystem	0	General = 1/Behavior Tree = 2/Game Mode Debug = 3/Move Goal Debug = 4/World State Debug = 5/Trace Manager Debug = 6	0x82
bot_drawNavNodes	0	1 = Bots Draw Nav Nodes In The World	0x81
bot_entityDebug	0	1 = Draw Debug Info About All Entities In The World	0x81
bot_followPlayer	0	1 = Bots Follow Around The Local Player	0x81
bot_input_disable	0	1 = Bots Can't Apply Any Inputs To The Game	0x81	Added in 'Sep 24 2021' update.
bot_jump_disable	0	1 = Bots Can't Jump	0x81
bot_matchChatChance	50	Chance ( Out Of 100% ) That A Bot Will Chat When The Match Starts/Ends	0x2	Added in 'Sep 24 2021' update.
bot_meleeDisabled	0	1 = Bots Don't Use Melee Combat Behaviors	0x81
bot_minClients	-1	Set How Many Clients You Want In Want The Server. -1 = Disable. 0 = No Bots Allowed	0x2
bot_move_debug	0	1 = Debug Bot Movement	0x81
bot_move_disable	0	1 = Bots Can't Move	0x81
bot_navNodeGoal	-1	>= 0 - Bots Will Move To This Nav Node In The World	0x82
bot_numBots	-1	Set How Many Bots You Want In Want The Server. 0 = Disable. > 0 = Number Of Bots To Spawn	0x2
bot_num_debug	0	Set To The Bot Number You Want To Debug	0x82
bot_pathTest	0	1 = Debug Bot Path Behavior	0x81
bot_pause	0	1 = Pause Bot Thinking	0x81
bot_randomChatChance	2	Chance ( Out Of 100% ) That A Bot Will Chat Randomly In-Game When The Situation Warrants	0x2
bot_respawnTime	0	Default Respawn Time For Bots. -1 = Disable Respawn	0x84
bot_senses_disabled	0	1 = Disable Bot Senses	0x81
bot_showBots	0	1 = Show All Bots In The World	0x81
bot_showPaths	0	1 = Bots Show The Path To Their Current Goal	0x81
bot_skill	2	Bot Skill Level. Valid Values 0( Training ) - 5( Nightmare )	0x12
bot_timeDelta	0.0167	Time Delta ( In Seconds ) Between Bot Updates)	0x4
bot_trackPlayer	0	1 = Bots Always Track The Local Player	0x81
bot_weapons_disable	0	1 = Bots Don't Use Weapons	0x81
campaign	0		0x42
chase_active	0		0x881
chase_back	100		0x14
chase_right	0		0x14
chase_up	16		0x14
cl_anglespeedkey	1.5		0x4
cl_animlerping	1	If enabled, interpolates alias model animations	0x11
cl_backspeed	400		0x4
cl_bob	0.02		0x14
cl_bobcycle	0.6		0x14
cl_bobup	0.5		0x14
cl_color	17		0x812
cl_connectvoice	1	Connect to voice in multiplayer lobbies	0x11
cl_crossx	0		0x14
cl_crossy	0		0x14
cl_displayMessages	1	Displays in-game messages	0x11
cl_edgeAccelerationScalar	0.4	Percentage of max turn rate to add when edge acceleration is active (0.0 does nothing; 1.0 doubles turn speed)	0x814
cl_edgeAccelerationThreshold	0.9	Percentage of joystick deflection needed before edge acceleration kicks in	0x814
cl_engineFPS	60	Frames per second the renderer runs at	0x12
cl_engineHZ	60	Frames per second to run the game logic at	0x202
cl_engineNoSleep	0	Don't sleep if the game is running too fast	0x11
cl_filterstuffcmd	1	Only allow certain cvars and commands to be set through stuffcmd to prevent servers from performing undesired actions	0x1	Added in 'Aug 26 2021' update
cl_forwardspeed	400		0x4
cl_gyroSensitivityX	4.0	Gyroscope turning sensitivity	0x814
cl_gyroSensitivityY	3.5	Gyroscope look sensitivity	0x814
cl_hdhud_ammo_alignment	1	Sets screen alignment for ammo icon (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_ammo_num_x	132	X offset for ammo num (HD Hud)	0x12
cl_hdhud_ammo_num_y	34	Y offset for ammo num (HD Hud)	0x12
cl_hdhud_ammo_x	44	X offset for ammo icon (HD Hud)	0x12
cl_hdhud_ammo_y	34	Y offset for ammo icon (HD Hud)	0x12
cl_hdhud_ammonum_alignment	1	Sets screen alignment for ammo num (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_armor_alignment	-1	Sets screen alignment for armor icon (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_armor_num_x	50	X offset for armor num (HD Hud)	0x12
cl_hdhud_armor_num_y	58	Y offset for armor num (HD Hud)	0x12
cl_hdhud_armor_x	20	X offset for armor icon (HD Hud)	0x12
cl_hdhud_armor_y	58	Y offset for armor icon (HD Hud)	0x12
cl_hdhud_armornum_alignment	-1	Sets screen alignment for armor num (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_face_alignment	-1	Sets screen alignment for face icon (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_face_x	20	X offset for face icon (HD Hud)	0x12
cl_hdhud_face_y	34	Y offset for face icon (HD Hud)	0x12
cl_hdhud_health_num_x	50	X offset for health num (HD Hud)	0x12
cl_hdhud_health_num_y	34	Y offset for health num (HD Hud)	0x12
cl_hdhud_healthnum_alignment	-1	Sets screen alignment for health num (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_key_alignment	1	Sets screen alignment for key icons (-1 = left, 0 = center, 1 = right) (HD Hud)	0x12
cl_hdhud_key_x	36	X offset for key icon (HD Hud)	0x12
cl_hdhud_key_y	52	Y offset for key icon (HD Hud)	0x12
cl_hud	1	0: no hud, 1: transparent hud, 2: standard hud, 3: standard hud with ammo	0x812
cl_interpolation	1	Enables interpolation (for high FPS and 144hz users)	0x11
cl_joyAccelerationSmoothing	20.0	Sets max turn acceleration	0x814
cl_joyAccelerationSpeed	15.0	Sets joystick acceleration speed	0x814
cl_joyApplyPitchAcceleration	1	Applies acceleration for gamepad up/down looking	0x811
cl_joyClampMinTurnLook	0.675	If enabled, then the minimum-most look axis relative to deadzone will be clamped, making it easier to turn left/right or look up/down in a straight line. Threshold controls aggressiveness	0x814
cl_joyConvertTurnToSquare	0	Convert view input from circle to square to prevent diag slowdown	0x811
cl_joyLogCurve	1	Apply a curve threshold while turning, 0 - none, 1 - logarithmic, 2 - exponential	0x812
cl_joyLogarithmicAccelerationThreshold	2.0	Sets a threshold for the logarithmic turn curve style	0x814
cl_joyinvertlook	0	Invert joystick look	0x811
cl_joylookspeed_x	0.575	Joystick Look speed (x-axis)	0x814
cl_joylookspeed_y	0.3	Joystick Look speed (y-axis)	0x814
cl_joymovesensitivity	4.0	Joystick Move sensitivity	0x814
cl_joysmoothing	1	Enables joystick look smoothing	0x11
cl_localplayers	1	Number of players for split screen (must be in co-op or deathmatch)	0x2
cl_lookspring	0		0x11
cl_lookstrafe	0		0x11
cl_maxlatetics	16	Maximum number of late gametics to run	0x12
cl_maxresendqueue	1	The number of messages the server will try to resend in a single frame	0x2
cl_mousesmooth	1	Set smooth mouse threshold	0x812
cl_movelerping	1	If enabled, interpolates move stepping for certain entities	0x11
cl_movespeedkey	2.0		0x4
cl_name	player		0x18
cl_nocsqc	1	CSQC is not currently supported.	0x8000
cl_nolerp	0		0x11
cl_pitchspeed	150		0x4
cl_predict	1	Turn on prediction	0x11
cl_predict_debug	0	Show prediction debugging info. 0: Off, 1: Server Origin (Green) vs Furthest Attempted Prediction (Cyan), 2: Prediction Origin (White) vs Camera with nudge (Yellow)	0x2
cl_rollangle	2.0		0x14
cl_rollspeed	200		0x14
cl_run	1	Enable always run	0x811
cl_saveScreenshotUserDirectory	1	If disabled, screenshots will save in the same directory as executable, otherwise will save to user save game folder	0x11
cl_saveScreenshotsAsJPEG	0	If enabled, screenshots will be saved out as JPEG instead of PNG	0x11
cl_sensitivity	5		0x14
cl_shownet	0		0x12
cl_sidespeed	350		0x4
cl_skipCrosshair	0	1 = Skip Drawing Crosshair	0x11
cl_skipHud	0	1 = No HUD	0x81
cl_skipViewBob	1	1 = Skip View Bob	0x811
cl_swapjoysticks	0	Swaps joysticks for movement and turning	0x811
cl_updateCPUUsageFrequency	500	Number of times in milliseconds to query CPU utilization. Higher frequencies will cause the result to be less accurate	0x12
cl_upspeed	200		0x4
cl_usegyros	1	Allow gyroscope input	0x811
cl_yawspeed	140		0x4
con_alwaysShowConsole	0	Overlays the console output to screen	0x11
con_fontsize	14	Sets size of console font (requires restart)	0x12
con_lockout	0	Locks user out of interacting with console	0x41
con_scrollamount	1	Sets the number of lines to scroll in console	0x12
con_showfps	0	Displays current FPS	0x11
con_statfontsize	12	Sets size of fonts for stat system (requires restart)	0x12
config_version	0	Configuration Version	0x12
coop	0	0 turns off Coop Completely.	0x1
crosshairStyle	+		0x818
crosshair_blue	255		0x812
crosshair_green	255		0x812
crosshair_red	255		0x812
d3d11_adapter	-1	Force select an adapter	0x12
d3d11_compileShaders	0	If enabled, then compile direct x shaders at RHI initialization	0x11
d3d11_noAltEnter	1	Prevent DXGI from responding to an alt-enter sequence (requires restart)	0x11
deathmatch	0	Deathmatch style to use. 0 turns off Deathmatch completely.	0x2
dem_compress	1	Compress demo commands	0x11
dem_record	0	Record demos	0x11
developer	0	Developer mode	0x11
edgefriction	2		0x14
fraglimit	0	Number of frags to win the game.	0x402
g_debuglocalization	0	Wrap strings in angled brackets when loading strings from loc file, must be set at command line	0x8001
g_drawWalkPath	0	1 = Show Walk Path To Where Your Looking. 2 = Set Start/Goal By Shooting	0x82
g_language		Language localization	0x18
g_removeAllAI	0	1 = Remove All AI In The Map	0x1
g_showClosestNavNode	0	Set To 1 To The Closest Nav Node From Your Position	0x81
g_showEnts	0	Set To 1 To Show In-Game Entities	0x81
g_showMonsters	0	Set To 1 To Show In-Game Monsters	0x81
g_showRuler	0	Set To 1 To Show In-Game Ruler	0x81
g_showSpawnPoints	0	1 = Show Deathmatch Spawn Points. 2 = Show Coop Spawn Point	0x82
g_showintromovie	1	Play intro movies on startup	0x11
g_sys_language		System language setting	0x18
g_vibration	1	Allow haptic vibrations	0x811
g_vibrationVolume	0.5f	Haptic vibration intensity	0x814
gamecfg	0		0x18
gamma	1		0x14
gl_cshiftpercent	100		0x14
horde	0	0 turns off Horde Completely.	0x1
hostname	UNNAMED		0x18
imgui_scale	0	> 0 = Override The Scale IMGUI Menus Use	0x4
in_joystick_laxisdeadzone	0.24	Sets dead zone threshold for left axis	0x814
in_joystick_lookaxis	3	Specifies the joystick axis for up/down	0x812
in_joystick_lookinvert	0	Inverts joystick up/down	0x812
in_joystick_raxisdeadzone	0.265	Sets dead zone threshold for right axis	0x814
in_joystick_strafeaxis	0	Specifies the joystick axis for left/right	0x812
in_joystick_strafeinvert	0	Inverts joystick left/right	0x812
in_joystick_xaxis	2	Specifies the joystick 'x' axis	0x812
in_joystick_xinvert	0	Inverts joystick 'x' axis	0x812
in_joystick_yaxis	1	Specifies the joystick 'y' axis	0x812
in_joystick_yinvert	1	Inverts joystick 'y' axis	0x812
in_nojoy	0	Disables joystick activation	0x11
in_profilejoybuttons	0	Display joystick button ID in console when pressed	0x1
in_skipplayerone	0	Prevents player one from being assigned a controller, controllers are passed to the next slot	0x11
jobs_concurrentThreads	-1	Specifies number of concurrent threads to process jobs. if none specified then all jobs are executed immediately. (Requires restart)	0x12
jobs_enable	1	Enables tasks to be distributed into job threads for performance	0x11
kf_basepath		Base file path to look for files	0x8
m_forward	0		0x14
m_pitch	0.022		0x14
m_side	0.8		0x14
m_yaw	0.022		0x14
navEdit_autoConnectNodes	1	1 = When Connecting A Source Node To A Target, Try To Automatically Connect The Target Back To The Source	0x11
navEdit_defaultNodeRadius	32	The Default Radius For Newly Placed Nav Nodes	0x14
navEdit_nodeDrawDist	1024	The Distance The Editor Draws Nav Nodes	0x4
navEdit_onlyTraceAgainstWorld	0	Look Point Only Traces Against World Geometry	0x1
navEdit_playSounds	1	1 = Play Sounds In The Nav Editor	0x11
navEdit_postConnectToNodeAction	1	0 = Keep The Source Node Selected. 1 = Switch To The Target Node After Connection Is Complete	0x11
navEdit_removeGodModeOnExit	1	1 = Remove 'God Mode' When Exit Nav Editor	0x1
navEdit_removeNotargetOnExit	1	1 = Remove 'No Target' When Exit Nav Editor	0x1
navEdit_showLinkType	0	0 = Show All Links. 1 = Only Show Nodes With One Way Links. 2 = Only Show Nodes With Non-Walk Links.	0x2
navEdit_skipLookPointValidation	0	ADVANCED USERS ONLY: Skip Validation Of Look Point	0x1
navEdit_skipValidation	0	1 = Skip Editor Validation Check When Saving Nav Nodes	0x1
navEdit_updateSourceHistoryOnConnectionChange	1	1 = Update Source Node History Any Time You Connect/Disconnect It From Another Node	0x11
navEdit_waterLookPointDist	72	Set Dist To Trace For Look Point When UnderWater	0x14
nav_edit	0	Set To 1 To Activate Nav Editor	0x81
nav_legend_xpos	0.5	The Starting X Postition For The Nav Legend Window. Valid Values = 0.0 - 1.0	0x14
nav_legend_ypos	0.66	The Starting Y Postition For The Nav Legend Window. Valid Values = 0.0 - 1.0	0x14
nav_properties_xpos	0.001	The Starting X Postition For The Nav Properties Window. Valid Values = 0.0 - 1.0	0x14
nav_properties_ypos	0.66	The Starting Y Postition For The Nav Properties Window. Valid Values = 0.0 - 1.0	0x14
net_compress	1	Enables compression of packets	0x11
net_config_com_baud	57600		0x12
net_config_com_irq	4		0x12
net_config_com_modem	1		0x12
net_config_com_port	1016		0x12
net_config_modem_clear	ATZ		0x18
net_config_modem_dialtype	T		0x18
net_config_modem_hangup	AT H		0x18
net_config_modem_init			0x18
net_crossplay	1	Enables the operation of crossplatform lobbies	0x11
net_cryptDynamic	0		0x41
net_cryptKeyserver	https://keyserver.silver.idtech.services		0x48
net_cryptKeyserverPort	443		0x48
net_directconn	1	Enables direct connections	0x11
net_messagetimeout	20		0x2
net_queueController	0	Controls whether matchmaking queues in controller-only lobbies	0x11
net_speechtotext	0	Enables Speech To Text	0x11
net_texttospeech	0	Enables Text To Speech	0x11
net_voip	1	Enables voice chat in multiplayer	0x11
net_voipmic	1	Enables the local microphone for voice chat	0x11
net_voipptt	1	Enables push to talk on the local mic	0x11
noexit	0		0x401
nomonsters	0		0x11
p_skipEdictTouch	0	1 = Don't Update Touching Edicts	0x81
pausable	1		0x1
playername		A player name to use if no social service is available	0x18
playfab_lobbyMaxPlayers	8		0x42
playfab_lobbyPrivate	0		0x41
playfab_lobbyTarget	crossplay		0x48
pr_checkextension	1	Set to 1 to allow checkextension use in QC, setting to 0 may resolve compat issues with modern mods, but will disable advanced QC features.	0x1
r_ambientOcclusion	0	Enables ambient occlusion	0x11
r_antialiasing	0	Sets a antialiasing mode	0x12
r_aoblurprecision	250.0	Sets AO blur precision factor. Used to fix halo artifacts	0x14
r_aodepthbias	4.0	Sets AO depth bias	0x14
r_aofullres	0	Sets AO full resolution	0x11
r_aointensity	4.0	Sets AO intensity	0x14
r_aomaxradiusshrink	0.25	Sets AO max radius shrink	0x14
r_aominradius	2.0	Sets AO min radius	0x14
r_aoradius	8.0	Sets AO radius	0x14
r_bloom	0	Enables bloom	0x11
r_brightness	0.0	Applies overall display brightness	0x14
r_brushmodeldepthbias	-0.000001	Sets a depth bias for brush models	0x14
r_brushmodelslopebias	0.5	Sets a slope bias for brush models	0x14
r_clear	0	Force Clear Screen Every Frame	0x1
r_clusterFrustumMaxZ	12000.0	Sets far z for cluster z-slice distribution	0x10004
r_clusterFrustumMinZ	10.0	Sets near z for cluster z-slice distribution	0x10004
r_computenormals	1	Compute vertex normals at runtime instead of using a pre-defined table	0x1
r_crtmode	1	Enables CRT emulation (Quake 64 only)	0x11
r_dof	1	Enables depth of field	0x11
r_dofBlurRange	0.0	Sets DOF blur range (debugging)	0x4
r_dofFocusDistance	0.0	Sets DOF focus distance (debugging)	0x4
r_dofFocusRange	0.0	Sets DOF focus range (debugging)	0x4
r_drawEntities	1	Draw Entities In The World	0x81
r_drawViewModel	1	Draw View Model	0x81
r_enablefog	1	Enables fog	0x11
r_fontHinting	0	Font hinting mode (Requires restart) (0 = normal, 1 = light, 2 = monochrome, -1 = none)	0x12
r_fov	74.0	Field of view	0x814
r_fullbright	0	Disables lightmaps	0x81
r_gamepadStyle	detect	The kind of gamepad style to use for drawing bindings.	0x818
r_generateMipMapsRunTime	1	Generate mip maps at runtime instead of loading from BSP (requires level restart)	0x11
r_lavaalpha	1.0	Sets alpha for all lava surfaces	0x14
r_maxocclusionunit	0.01	Determines the threshold to re-issue an occlusion query	0x14
r_md5models	1	Render MD5 models instead of alias models (if available)	0x11
r_monochromelightmaps	0	If enabled, lightmaps will display as grayscale	0x11
r_motionBlur	0	Enables motion blur	0x11
r_motionBlurShutterSpeed	250.0	Sets the motion blur shutter speed. Smaller the value, the more sensitive the blur will become	0x14
r_motionBlurVisualize	0	Enables debugging visualization of motion blur	0x1
r_noEntityCastShadowList	progs/missile.mdl,progs/flame.mdl,progs/flame2.mdl,progs/lavaball.mdl,progs/grenade.mdl,progs/spike.mdl,progs/s_spike.mdl,progs/laser.mdl,progs/lspike.mdl,progs/candle.mdl	Filter list that excludes any entities matching the specified model to not cast shadows	0x18
r_nolerp_list	progs/flame.mdl,progs/flame2.mdl,progs/braztall.mdl,progs/brazshrt.mdl,progs/longtrch.mdl,progs/flame_pyre.mdl,progs/v_saw.mdl,progs/v_xfist.mdl,progs/h2stuff/newfire.mdl	Filter list that excludes any entities matching the specified model to not perform any animation interpolation	0x18
r_notextures	0	Disables texture mapping	0x1
r_oitClamp	3000.0	Sets weight clamp value for OIT blending	0x14
r_oitWeight	10000.0	Sets the weight value for OIT blending	0x14
r_partdepthbias	-0.0001	Sets a depth bias for particles	0x14
r_partslopebias	-4.0	Sets a slope bias for particles	0x14
r_previewlightmap	-1	Display lightmap texture (num = which page to display) (debugging)	0x2
r_renderWaterViewFX	1	1 = Draw Water View FX When In Water	0x1
r_resolutionscale	0	Enable resolution scaling - can either be at a fixed scale or dynamically adjust based on performance	0x12
r_resolutionscale_aggressive	0	If enabled, resolution scale will adjust aggressively	0x11
r_resolutionscale_fixedscale	1.0	Forces the resolution to scale at this value (ignored if dynamic scaling is enabled)	0x14
r_resolutionscale_gooddrawtime	0.9	The required time in which the session draw time must fall under in order to upscale the resolution (Note: use the statrhi command to see the session draw time)	0x14
r_resolutionscale_increasespeed	0.1	Sets how fast to upscale the resolution	0x14
r_resolutionscale_lowerspeed	0.1	Sets how fast to downscale the resolution	0x14
r_resolutionscale_numframesbeforelowering	20	Number of frames to wait before decreasing resolution when performance is bad	0x12
r_resolutionscale_numframesbeforeraising	200	Number of frames to wait before increasing resolution when performance is good	0x12
r_resolutionscale_targetdrawtime	1.125	The targeted session draw time before downscaling the resolution (Note: use the statrhi command to see the session draw time)	0x14
r_rhimaxanisotropic	0	Sets quality level for anisotropic texture filtering	0x12
r_rhirenderfamily	vulkan	Set which graphics driver API to use	0x18
r_shadowcachelifetime	1000	How long should a unused shadow view remain in cache	0x10002
r_shadows	1	Enables shadow mapping	0x11
r_shownormals	0	Display surface normals (debugging)	0x1
r_showoverdraw	0	Display tile lighting overdraw - blue indicates good, red indicates bad (debugging)	0x1
r_showshadowatlas	0	Displays the shadow map atlas (debugging)	0x1
r_showtris	0	Render geometry as wireframe (debugging)	0x1
r_slimealpha	1.0	Sets alpha for all slime surfaces	0x14
r_squareparticles	1	Particles are displayed as solid quads (Quake64)	0x11
r_staticshadows	1	Enables static shadow mapping	0x11
r_subdivide_size	64	Sets subvided size for sky and water surfaces	0x12
r_telealpha	1.0	Sets alpha for all teleport surfaces	0x14
r_textureMode	nearest_mipmap_nearest	Sets texture mode	0x18
r_verticalsplitscreen	0	Controls if 2 player splitscreen is vertical or horizontal	0x11
r_visualizeAO	0	Show ambient occlusion results (debugging)	0x1
r_wateralpha	1.0	Sets alpha for all water surfaces	0x14
registered	1	Determines if game is shareware or fully registered copy	0x8001
samelevel	0		0x1
saved1	0		0x18
saved2	0		0x18
saved3	0		0x18
saved4	0		0x18
savedgamecfg	0		0x18
scr_blurbackgroundformenu	1	Blur background when menu is active	0x11
scr_centertime	5		0x12
scr_displayCenterMessages	1	Displays centered in-game messages	0x11
scr_dosresolution	0	Emulates VGA 320x240 resolution	0x11
scr_maxlines	4	Maximum amount of lines to display on screen at once.	0x12
scr_ofsx	0		0x14
scr_ofsy	0		0x14
scr_ofsz	0		0x14
scr_polyblend	1	Enables screen flashes (powerups, damage, pickups, etc)	0x11
scr_printspeed	8		0x12
scr_screenscale	0	Set scale for on-screen overlay. If zero, then it will auto-scale based on resolution	0x14
scr_showpause	1		0x11
scr_showram	1		0x11
scr_showturtle	0		0x11
scr_textfadethreshold	0.25	Sets threshold for fading out center text	0x14
scr_underwater_magnitude	6	Sets magnitude of the underwater wave effect	0x14
scr_underwater_speed	80	Sets speed of the underwater wave effect	0x14
scr_underwater_spread	3	Sets spread of the underwater wave effect	0x12
scr_underwater_strips	240	Sets the number of strips for the underwater effect	0x12
scr_usekfont	0	Enable Unicode font rendering, can be set by mods that are aware of localization.	0x1
scratch1	0		0x14
scratch2	0		0x14
scratch3	0		0x14
scratch4	0		0x14
serverprofile	0		0x1
skill	1		0x2
snd_ambient_fade	100	Sets ambient fade factor	0x14
snd_ambient_level	0.3	Sets ambient level threshold	0x14
snd_hardwarereverb	1	Enable hardware reverb effects	0x11
snd_lowpasscutofffreq	6833	Specifies the cut-off frequency for the low pass filter	0x12
snd_lowpassfilter	1	Enable low pass filter for digital sound effects	0x11
snd_lowpassgain	0.8	Low pass filter gain for high frequencies	0x14
snd_mixahead	0.1	Sets mix ahead value for the sound mixer	0x14
snd_musicvolume	1.0	Music volume	0x14
snd_nosound	0	Disables audio on startup	0x11
snd_precache	1	Precaches audio on level load	0x11
snd_voicelanguage	0	Language of voice effects	0x12
snd_volume	0.85	Sound volume	0x14
spawnEdit_monstersOnly	1	1 = New Spawn Nodes Will Only Work For Monsters	0x1
spawnEdit_playSounds	1	1 = Play Sounds In The Spawn Editor	0x11
spawnEdit_renderDepthTested	0	0 = Draw Spawn Nodes Through The World	0x1
spawnEdit_spawnDrawDist	2048	How Far To Draw Spawn Nodes In-World	0x4
spawn_edit	0	Set To 1 To Activate Spawn Editor	0x81
sv_accelerate	10		0x14
sv_aim	1		0x8040
sv_cheats	0	Enable cheats	0x82
sv_clientauth	1	Give clients a slight bit of authority over their own position	0x1
sv_controlleronly	0	PlayFab matchmaking distinguishes between devices in use	0x1
sv_friction	4		0x14
sv_gibGravity	0	> 0 = Override Gravity For Gibs	0x4
sv_gravity	800		0x14
sv_idealpitchscale	0.8		0x14
sv_maxspeed	320		0x14
sv_maxvelocity	2000		0x14
sv_nostep	0		0x11
sv_protocol	666	Sets server protocol	0x42
sv_quitAfterChangelevel	0	Instructs server to exit instead of changing level	0x1
sv_skipEdictTouch	0	1 = Don't Update Touching Edicts	0x81
sv_stopspeed	100		0x14
sv_wallfriction	0	Friction is applied to players when angle is facing a wall	0x1
sys_kpfram	0	Load all KPF files into RAM	0x11
sys_logresourcemsgs	0	Show resource loading debug messages	0x11
teamplay	0		0x402
temp1	0	Reserved For QuakeC Usage	0x12
temp2	0	Reserved For QuakeC Usage	0x12
temp3	0	Reserved For QuakeC Usage	0x12
temp4	0	Reserved For QuakeC Usage	0x12
temp5	0	Reserved For QuakeC Usage	0x12
timelimit	0	Maximum amount of time the game can last for, in minutes.	0x402
ui_addonsBaseURL	https://mods.silver.idtech.services/	Base URL for the add-ons directory	None
ui_creditspeed	1.0	Scale factor for the credits speed	0x4
ui_modellerp	1	Sets both move lerp and anim lerp at once	0x10
ui_showfull	1	Shows full matches in the match browser	0x11
ui_showquitmessage	0	Shows quit message when exiting client	0x11
v_borderless	0	Hide window border for non-fullscreen mode	0x11
v_centermove	0.15		0x14
v_centerspeed	500		0x14
v_displaymonitor	0	Set index for which monitor to display	0x12
v_displayrestart	-1	Internal use only - do not modify	0x2
v_height	768	Video resolution height	0x12
v_idlescale	0		0x14
v_ipitch_cycle	1		0x14
v_ipitch_level	0.3		0x14
v_iroll_cycle	0.5		0x14
v_iroll_level	0.1		0x14
v_iyaw_cycle	2		0x14
v_iyaw_level	0.3		0x14
v_kickpitch	0.6		0x14
v_kickroll	0.6		0x14
v_kicktime	0.5		0x14
v_refresh	60	Video refresh rate (fullscreen only)	0x12
v_vsync	1	Vertical sync (0 = off, 1 = on, -1 = adaptive)	0x12
v_width	1024	Video resoultion width	0x12
v_windowXPos	0	Sets X Offset of window (window mode only, use restart command to take effect)	0x12
v_windowYPos	0	Sets Y Offset of window (window mode only, use restart command to take effect)	0x12
v_windowed	0	Set either windowed or fullscreen mode	0x11
vk_assertOnValidationError	0	If enabled, an assert will trigger if validation reporter triggers a warning or error	0x11
vk_compileShaders	0	If enabled, then compile spriv shaders at RHI initialization (requires Vulkan SDK to be installed)	0x11
vk_dumpMisCachedPipelineToFile	0	Dumps all cached pipelines to file and the pipeline that didn't match to another file	0x10001
vk_enableDebugging	0	Enables layer validation and debug outputs (requires a restart)	0x11
vk_waitOnCommandDuringPresentation	0	Always wait on all command buffers during swap chain presentation (debugging)	0x11
win_allowmanualaffinitymask	0	If 0, then let the OS deal with scheduling, if not then affinity mask is set by the engine	0x11
win_mdmpwithheap	0		0x11
win_numanode	0	Specifies the desired NUMA Node to use on the system to keep all threads on the same node. -1 skips this and allows allocation on any thread.	0x12
ww_ammo_size	24.0	Size of ammo counter display for weapon wheel	0x14
ww_arrow_offset	102.0	Sets the offset position for weapon wheel selection arrow	0x14
ww_popout_amount	4.0	Sets how far to pop out the selected weapon icon for weapon wheel	0x14
ww_popout_speed	7.2	Sets how fast to pop out the selected weapon icon for weapon wheel	0x14
ww_screen_frac_x	0.76	Sets horizontal fractional value of the screen for the wheel to display at	0x14
ww_screen_frac_y	0.5	Sets vertical fractional value of the screen for the wheel to display at	0x14
ww_size	640.0	Weapon wheel size - smaller the value, the larger the display	0x14
ww_timer_speed	3.0	How fast the weapon wheel fades in and out	0x14
ww_unavailable_shade_value	80	Sets how much to shade the item if not available in inventory for weapon wheel	0x12
ww_underpic_nudge_amount	4.0	Sets weapon wheel underline icon offset	0x14